Specifications

33
You may have to use trial and error to perfect the cu
maximum binding of the ink pigments to the garment
the garment.
WASHING Garments
Garments printed with the DTG HM1 Kiosk™ can be l
idea to give your customer the following washing instructio
Turn the garment inside out before washing and
use cold water only and a medium dryer te
Canceling a Print Job
ring process to ensure
, without any heat damage to
13.
aundered as normal. It is a good
ns:
drying,
mperature.
7.2
On rare occasions you may find you cannot get your printer to print. Check the following to
recti
fy the problem:
Is the printer in the LOAD position when you send the print command?
D d if
th
oes the printer think that it has run out of ink? – a red ink light will be flashing or soli
is is the case.
Is
It may be best to cancel the print job and start again. As with any inkjet printer, it is
some
This for 3-5 minutes) and turn it back
on again to clear any data that may be in the printer buffer.
there a problem with the file you are printing from?
times difficult to stop a print job with the DTG HM1 Kiosk once you have set it in motion.
may also require you to turn the printer off (leave off