Specifications

Click on the Ink Charge

button. The dialog

should now display a

status bar, and the HM1

Kiosk should start

ink bottles through to

saying “Ink Charge has

the

in e

way

th a Print Head

Hea

nce you are done, click on Finish, then Quit the main Maintenance/Adjustment Program

screen.

e bulk ink bottles as you use the

“pumping” ink from the

the print head. Once the

Ink Charge is complete,

you will be presented

with an information box

been completed

properly”. Click OK.

You w

ill probably need to repeat the Ink Charge several times to draw the ink fully through

k tubes and into the Print Head. Some ink colours may take longer than others to pull all th

through to the dampers & print head. Once you can see that all the ink tubes leading into

e Print Head are full of ink, click on the Cleaning button. This will execute

ean which involves the printer both pumping a little more ink through the Print Head and

oving the Printer Head across a Wiper Blade which wipes excess ink from the face of the Print

From this point on, you will simply need to add ink to th

system. Take care to avoid creating bubbles when doing so. Or alternatively, add ink aft

production has finished for the day, allowing bubbles to settle overnight before again usin

the printer. Remember to keep ink bottles between 50% and 75% full at all times.