Specifications

19
Copy all files from the CD to a suitable location on your computer’s hard drive.
Open the folder containing these files from your computer’s hard drive.
Double click the Sentinal Protection Installer 7.3.0.exe file & follow the prompts – this will
install the necessary files to allow your computer to recognize the Maintenance Program
security device. Please note that the Maintenance Program will not operate without this
security device.
Insert the security device into a USB port on your computer.
Double click the KioskAdj.exe file to start the Maintenance Program.
5.6 Drawing Ink from the Ink Bottles to the Print Head
As discussed in Section 5.5, you will need to use the HM1 Kiosk Maintenance/Adjustment
Program to draw ink from the Ink Bottles through to the print head. This process is also
referred to as Charging the Print Head (with Ink).
Start the HM1 Kiosk Maintenance/Adjustment Program as per Section 5.5. You will be
presented with the following dialog box:
If you only have the one HM1 Kiosk /
Epson R2400 installed on your
computer, please leave the Port
selection set to Auto Selection,
otherwise you will need to manually
select the (USB) port to which the
HM1 Kiosk is connected from the drop
down list. Click OK.
Select Ink charge & click OK.