Specifications

37
9. Printing on Textiles with the DTG Kiosk™
Printing on textile items with the DTG Kiosk™ is a very simple process involving four easy steps:
1. Create an image in any of your graphics programs
2. Load a T-shirt or other textile item onto the printer
3. Choose the appropriate Print Mode
4. Press the Print button.
Before you start the process you need to understand the Control Panel and what its buttons and
lights mean. Read this section again before you start the process.
9.1 Control Panel Buttons and Lights
T
p
y
i
he POWER button turns the printer on and off. This button flashes while the
rinter begins various movements, such as self cleaning etc. It will also flash when
ou are changing the ink cartridges and during data processing or printing. When it
s ready to print, the button will stop flashing and become solid green.
The ERROR EJECT button turns on when the print data is sent from your PC or Mac
even though the printer tray is not at the print starting position.
>>> Press LOAD button to move the printer tray to the starting position.
This button flashes and the printer tray stops when the printing process is
cancelled in PC.
>>> Press ERROR EJECT button to eject the printer tray.
The INK button was originally used to change the ink cartridges in a standard Epson
2100/2200. On the DTG Kiosk™ it is used as a HEAD CLEANING button. Press this
button for 3 seconds to clean the printer head. Also press this button for 3
seconds after pressing the Ink Fill button.
The LOAD button loads the printer tray to the print starting position (loading
position). Press this button to load the printer tray to the print starting position.
When the LOAD light turns on again, the printer is ready to print.