Specifications
35
Solid 720dpi for Mac OS X
1. Go to File/Page Setup or Print Setup. Under Format for select the Stylus Photo
2100 printer driver. Bring the Paper Size menu down and select the desired page
size. Click OK. This step needs to be done before you print from each file. This
setting CANNOT be saved.
2. Go to File/Print. Select the Stylus Photo 2100 printer driver. Bring Copies and
Pages menu down and select Print Settings.
3. Leave the Media Type set to Enhanced Matte Paper and Print Quality to Photo -
720dpi. Un-check High Speed.
4. Bring Print Settings menu down and select Color Management. Choose Color
Controls and Gamma 1.8.
5. Set Mode to Vivid.
6. Saturation should be set to +25%.
7. Magenta and Yellow to +5%.
8. Bring Color Management menu down and select Ink Configuration. Set the Color
Density to +20%.
9. Save this setting as Ksk-SOlid-720.
10. Bring Presets menu down. Choose Save As.
11. Name the Preset to Ksk-Solid-720.
Remember: When you go to print again, re-set your page size. Then go to File/Print.
Bring the Presets menu down and select the new Preset of Ksk-Solid-720.
Solid 720dpi High Speed for Mac OS X
1. Follow the above steps for Solid 720dpi but check High Speed in the Advanced
window.
2.
Save this setting as Ksk-Solid-720HS.
Process 360dpi for Mac OS X
When creating images that have skin tones and reference colors, or those that are
photorealistic, you need to create Print Modes that are more accurate with less color
saturation. We will call these the Process Modes.
1. Go to File/Page Setup or Print Setup. Under Format for select the Stylus Photo
2100 printer driver. Bring the Paper Size menu down and select the desired page
size. Click OK. This step needs to be done before you print from each file. This
setting CANNOT be saved.
2. Go to File/Print. Select the Stylus Photo 2100 printer driver. Bring Copies and
Pages menu down and select Print Settings.
3. Leave the Media Type set to Plain Paper and Print Quality set to Normal - 360dpi.
4. Bring Print Settings menu down and select Color Management. Choose Color
Controls.
5. Set Mode to Photo-realistic.
6. Bring Color Management menu down and select Ink Configuration. Set the Color
Density to +20%.