Specifications
28
To Set the Paper Size for Mac OS 8.6 - 9.2
You must set the size of the garment image in the Epson Printer Driver before you print
anything. As your DTG Kiosk has a printing bed size of 32cm x 47cm, this is the standard size you
will set up in your Printer Driver. To print on odd sized items you can use either the standard
printing bed size and create a printing Template to use, or you can set up your own custom
sizes for these items. The upper left corner of the page size corresponds with the ‘0’ on the
rulers on your computer.
1. In the Epson 2100/2200 Printer Driver select the Page Setup/Print Setup menu and
bring down the Paper Size menu. Select the desired page size.
2. Click on the Customise button.
3. Click on New and insert the Paper Size, Width, Height and Margins.
4. Click OK.
Now you are ready to create the Custom Print Modes
7.3 Creating Custom Print Modes for Mac OS 8.6 - 9.2
You will need to create six new Custom Print Modes: Solid 360dpi, Solid 720dpi, Solid 720dpi
High Speed, Process 360dpi, Process 720dpi, and Process 720dpi High Speed.
Solid 360dpi for Mac OS 8.6 - 9.2
To make the ink colours stronger and brighter when you are printing a solid image or a simple
spot color image you will need extra ink color saturation. The following instructions explain how
to do this but should not be used for full colour images or photographs as over saturation can
dull the image and make the colours appear muddy.
1. Go to File/Print Setup or Page Setup.
2. Select your Paper Size.
Please note: Mac OS 9 does not allow you to save the Paper Size with the Printing
Modes. This would have to be re-set for each image printed through the Epson
2100/2200 printer driver.
3. Go to File/Print. Bring the Media Type menu down and select Plain Paper.
4. Set the Mode to Custom.
5. Click on the Advanced button.
6. Set the Print Quality to Normal - 360dpi.
7. All buttons on the left side should be unchecked.
Note: High Speed is checked but is not available.
8. Color Management should be set for Color Controls and Gamma of 1.8.
9. Mode should be set for Vivid.
10. Saturation should be set to +25%.
11. Magenta and Yellow to +5%.
12. Click on Ink Config and set Color Density to +20%.
13. Click the Save Settings button.
14. Save this setting as Ksk-Solid-360. Click Save.