Specifications

Please note: Pay close attention to the waste ink

bottle. Always empty the bottle before filling the

ink bottles.

4. Fill Tubes & Settle Bubbles

Make sure all the tubes are filled with ink and there

are no bubbles in the tube.

5. Clean the Printhead

Press and hold the Ink button for 3 seconds to clean the

head. This will normalize the head nozzles.

Please Note: do this

after filling the ink.

From this point on, you will simply need to add ink to the bulk ink bottles as you use the

system. Take care to avoid creating bubbles when doing so. Or alternatively, add ink after

production has finished for the day, allowing bubbles to settle overnight before again using the

printer.