Specifications

5. Filling Ink Bottles

1. Pour Inks into the Ink Bottles:

Remove the lids of the bulk ink bottles, and slowly

pour the ink into the ink bottles.

Please Note: Pour the ink gently so as to avoid

creating air bubbles when pouring the ink. If

bubbles are formed then do not run the printer

until all the bubbles have settled

2. Open the Valves:

Turn all valves to put through ink

(as shown in picture on right)

3. Press the “INK FILL” Button to Start Filling the Ink:

Press & hold the Ink Fill Button to start filling the ink

lines with ink. This pulls the ink through to the print

head. To stop filling, release the button. Some ink

colours may take longer than others to pull all the way

through to the dampers & print head. In this case, you

can close the ink valves (see section 2 above) for those

colours that have fully charged, then continue filling

those colours that have not.

This will prevent unnecessary wastage of ink. The ink is

fully charged when you can see ink in the dampers (refer

to the Printer Components section above for the location

of the dampers).

Remember to open any ink valves that you may

have closed.