User Manual

DTG CONNECTION
User Maintenance Precautions
4
Cleaning
Guide Rod
(Monthly)
Ink mist adhering to the guide rod is cleaned and removed
every month.
If maintenance is not performed regularly, the carriage will
not operate normally and may cause abnormal noise, poor
carriage scanning, poor head ejection, and clogging of the
head nozzle.
3.1.
Maintenance
Schedule
(Monthly)
3.5. How to
Clean the Guide
Rod
Video
instruction:
5
Cleaning
Encoder
Sheet
(If necessary)
Encoder sheets are not for regular maintenance.
Please carry out as necessary in the following cases.
-When a CR encoder error occurs due to dirt such as
grease adhering to the encoder sheet.
-When vertical lines are displayed on the printed image.
The encoder sheet is made very precisely, so please be
careful when cleaning it.
If you rub it with a strong force, the position of the carriage
cannot be recognized correctly, which may cause image
failure, ink leakage, or printer failure.
Follow the user manual for proper cleaning instructions.
3.5. How to
Clean the Guide
Rod
Cleaning the
Encoder Sheet
6
Long-term
Storage or
shipping
For long-term storage (powered off for 2 weeks or longer)
or shipping, replace the ink with cleaning solution and attach
a head protection cover to the carriage.
If the printer is stored or transported while it is filled with
ink, the ink inside may stick and cause ink leakage or head
nozzle clogging.
6. Preparing
Your Printer for
Storage/
Shipping
Guide Rod : Main
Guide Rod : Front
Encoder sheet
Print direction
(moving carriage direction)