User Manual

DTG CONNECTION
User Maintenance Precautions
5
When an error is
displayed
If an error is displayed on the screen, try to resolve it
immediately.
Do not leave the machine in the error status.
Circulation in the white ink path is stopped and other
automatic head maintenance operations are not performed
when the machine is in the error status, which may cause
head ejection failure or head nozzle clogging.
Fix the cause of the error or turn the power off and then back
on and check that the operation panel is in the "Ready"
state. Circulation in the white ink path and automatic head
maintenance will resume after recovery from the error
status.
If the error persists, contact your sales or service
representative with the machine turned on.
<Ready: OK>
<Error: NG> Do not leave the machine.
Also, If the error persists, please attach the head
protection cover to the carriage unit.
Attaching the head protection cover may help prevent the
nozzle from drying out and delay its deterioration.
9.2. If an SC
(Service Call)
error is
displayed
Attaching the
head
protection
cover
5-1
Error example 1
When CR
encoder error
(JAM) occurs
Do not leave the carriage unit positioned anywhere other
than on the maintenance unit. This may cause the print
head to dry out and become clogged.
If the carriage unit gets stuck on the media on the platen,
follow the steps below to recover.
(1) Remove the media.
(2) Press "CAP IN" displayed on the operation panel. The
carriage unit returns to the maintenance unit.
(3) Turn off and on the power and, restart.
―