User Manual

DTG CONNECTION
User Maintenance Precautions
3
Platen height
adjustment
Adjust the gap between the media and print head and
ensure the optimal gap is maintained.
Do not lower the platen too far.
If the gap between the fabric and print head is too large,
this may cause ink mist. If the ink mist spreads inside the
printer, this may cause damage to the sensor and circuit
board.
If there is a problem with the height, <Display1> appears on
the screen and prompts you to turn the height adjustment
knob. Following the instructions on <Display1>, turn the
height adjustment knob while stopping to check the
operation panel every quarter turn.
<Display1>
2.4. Adjusting
the Height of
the Platen to
the Print
Position
4
How to recover
clogged nozzles
Perform automatic head cleaning on the display panel.
Do not perform any actions other than the cleaning method
described in the user manual. It may cause printer failure.
3.3. AUTO
HEAD CLEAN