User Manual

DTG CONNECTION

User Maintenance Precautions

Incorrect

Correct

Wetting the

indicated areas

with a wet

cleaning

applicator.

Front side: Screw hole and its vicinity

Back side: Leaf spring and its vicinity

Note

Using a wet cleaning applicator may cause the liquid to seep in

through the gaps in the parts and result in short circuits in the

electrical parts and damage to the printer. Be careful not to make

the indicated parts wet.

These areas do not need to

be cleaned. Keep them as

they are. If these areas have

become dirty and appear to

require cleaning, be sure to

use a dry cleaning applicator.

Incorrect

Correct

With the cleaning jig attached, wiping the areas indicated with

a wet cleaning applicator.

Normally, it is not necessary to

clean the areas indicated in the

photo.

However, if the areas are stained

and you wish to clean them, wipe

them with a dry cleaning applicator.

For details, see "How to Clean the

Cover of Head Nozzle Plate (the

Nozzle Cover)" in the User Manual.

Front

Back

Front

Back

Printed in Korea