User Manual

DTG CONNECTION
User Maintenance Precautions
The correct and incorrect ways of cleaning are as follows.
Incorrect
Correct
Dampening the cleaning
applicator with the
cleaning liquid, and
cleaning each side of
the head (part shown in
red).
Note
Due to the structure of the head, the cleaning
liquid may enter the head from the sides and
cause a short circuit.
Wear gloves. Dampen the cleaning applicator
with an appropriate amount of cleaner liquid,
and pinch the tip to squeeze out excess cleaner
liquid. Carefully wipe the yellow area shown in
the picture with the cleaning applicator without
touching the red area.
Incorrect
Correct
The sides of the head (red area shown in the picture
below) is do not need to be cleaned. Keep this area
as it is. If the sides have become dirty and appear to
require cleaning, be sure to use a dry cleaning
applicator.
Use only a dry
cleaning applicator.
Do not clean
the nozzle
side cover
with a wet
cleaning
applicator.