User Manual

DTC COMMUNICATIONS, INC.
6
Description
• You may turn the device ON or OFF, remotely, by attaching a switch to one
of the pins on the Multi I/O connector. DTC provides hard-wired and wireless
switches for this application.
• The power applied to the Multi I/O pin is automatically looped through the
unit, and available on a second pin to power a remote device, such as a
camera. If you apply 9 Volts in, you will get 9 Volts out.
WARNING:Make sure your camera will operate on the voltage being
supplied to the transmitter.
• The VBL/S series supports Ovation Micro ViewLock II encryption, which
adds approximately .35” to the width of the unit.
Feature
Remote Switching Capability
External Power Loop Through
Encryption Option
FEATURES