User Manual

DTC COMMUNICATIONS, INC.
21
dBic Wideband Panel
Connector: TNC Female
ANTENNASPart Number Description
DTC has developed a series of circularly polarized panel antennas for use in
wideband transmit and receive applications from 1.7 to 2.7 GHz.
The ANT-10-R is a very wide bandwidth, unidirectional log-spiral array. This
antenna has useful gain, with some sidelobe variation, to 4 GHz.
It can be mounted to a wall or swivel mounted with the MAF-1 grip on two sur-
faces, via two pairs of “1¦4-20” tapped holes located in the rear center and the
bottom center of the aluminum housing. The front of the
antenna is a radome made of a polycarbonate material. The antenna is suitable for
indoor and short-term outdoor use. It must be protected for extended outdoor use
and installations since it is not waterproof.
DTC developed this very high gain RHCP antenna for the 2.4 to 2.5 GHz band. It
provides unidirectional broadside coverage. Unlike conventional Yagi antennas,
this antenna is especially suitable for wall mounting. This panel antenna is useful
in long-range receive applications, applications in high, multi-path environments,
where it is impractical or impossible to mount a dish antenna.
ANT-17-R
ANT-109
17 dBic Directional Patch Array
Connector: TNC Male on 18" coax.
“pigtail”