User Manual

DTC COMMUNICATIONS, INC.

Video In, External DC, Camera Power, and optional Remote

USING LOOP THROUGH, SINGLE POWER SOURCE, FOR TRANSMITTER AND CAMERA

NOTE: You will need external

camera power if voltage to the

transmitter is not compatible with

camera’s operating voltage, and/

or you need greater battery life,

and/or your camera draws more

than 200mA.

This equipment configuration shows the

video signal coming in, and an external

DC Power source for the transmitter

and camera at 9-16V. The power

source for the camera is an internal

loop. The “Remote On” function is

accomplished by connecting the

Remote On to ground.