User Manual

DTC COMMUNICATIONS, INC.
13
NOTE: You will need external
camera power if voltage to the
transmitter is not compatible with
your camera’s operating voltage,
and/or you need greater battery
life, and/or your camera draws
more than 200mA.
This equipment configuration shows the
video signal coming in, and an external
DC Power source for the transmitter
only at 9-16V. It is also configured with
a seperate DC power source for the
camera.The “remote on” function is
accomplished by connecting the remote
on to ground (optional feature).
Video In, External DC for Transmitter,
External DC for Camera and optional
Remote On
USING A SEPARATE CAMERA POWER SOURCE