User Manual

DTC COMMUNICATIONS, INC.

PROGRAMMING

SERIAL PORT OF

COMPUTER

COM1 OR COM2

AC POWER

ADAPTER

1 Make sure the video transmitter ON/OFFswitch is set to OFF. The red dot is

OFF.

2 Make sure the transmitter has an antenna installed into the antenna connec-

tor prior to programming.

3 Install the programming cable into the Multi I/O connector on the transmitter.

4 Plug the serial cable of the programming cable

into the COM1 or COM2 port of your computer

and plug in the AC adapter.

5 Turn the transmitter switch to ON. The green dot

is ON.

6 Select Start, programs, DTC communications on

your computer.

7 The system allows you to select device COM1 or

COM2, depending

on which serial port

you are connected

to.

8 Follow the instruc-

tions on the DTC

Universal Program-

ming screens to

begin the download

process.