User Manual

DTC COMMUNICATIONS, INC.
15
This configuration consists of the video transmit-
ter, Vidi-Wire antenna, and DTC cable part
number 4045192-024. This cable is connected to
the multi/IO port of the transmitter, and is config-
ured to supply:
• The video signal from the camera to the
transmitter.
• Power (5 V) to the camera through the
internal battery pack.
• Remote on function through a hard wired
switch or remote Key FOB transmitter. This
remote on function overrides the OFF switch
located on the transmitter chassis.
The Remote On function allows you to turn the
transmitter on from a remote location. The Remote
On function overides the OFF switch on the
transmitter.
FRONT PATCH
ANTENNA
BACK PATCH
ANTENNA
SPLITTER
CAMERA
MICROPHONES
TRANSMITTER
HARD WIRED
SWITCH
KEY FOB
SWITCH
RECEIVER
KEY FOB
SWITCH
TRANSMITTER
STRIPPED AND
TINNED LEADS
STANDARD
TO OPEN:
TO OPEN:
PUSH THIS TAB DOWN TO RELEASE THE MOLEX
LOCKING MECHANISM, THEN PULL CONNECTORS
APART.
TO CLOSE:
PUSH CONNECTORS TOGETHER UNTIL THE
MOLEX LOCKING MECHANISM CLICKS AND LOCKS
Cable 4045192-024
ADDING REMOTE ON FUNCTION