User Manual

DTC COMMUNICATIONS, INC.

NOTE: You will need external camera power if

voltage to the transmitter is not compatible

with camera’s operating voltage, and/or you

need greater battery life, and/or your camera

draws more than 200mA.

This configuration consists of the video transmitter,

Vidi-Wire antenna, and DTC cable part number

4045192-024. This cable is connected to the multi/

IO port of the transmitter, and is configured to

supply:

• The video signal from the camera to the

transmitter.

• Power to the transmitter and camera through

the internal battery pack.

• Remote on function through a hard wired

switch or remote Key FOB transmitter. This

remote on function overrides the OFF switch

located on the transmitter chassis.

ADDING REMOTE ON FUNCTION TO BASIC

FRONT PATCH

ANTENNA

BACK PATCH

ANTENNA

SPLITTER

CAMERA

MICROPHONES

TRANSMITTER

HARD WIRED

SWITCH

KEY FOB

SWITCH

RECEIVER

KEY FOB

SWITCH

TRANSMITTER

STRIPPED AND

TINNED LEADS

STANDARD