User Manual

DTC COMMUNICATIONS, INC.
14
EXTERNAL TRANSMITTER POWER
The VMS/VML-250 configuration, which uses
the loop through power source for the camera,
consists of the video transmitter and DTC cable
part number 4045189-024 . This cable is
connected to the multi I/O port of the transmit-
ter.
It is configured to supply:
• The video signal to the transmitter
from the camera.
• Power to the transmitter through a
molex connector that can be easily
connected to DTC’s battery packs.
• Power to the camera through a
molex connector that can easily be
connected to DTC’s optional
cameras.
CAMERA
ANTENNA
POWER SOURCE
for transmitter only,
9-16 V.
STRIPPED AND
TINNED LEADS
STANDARD
A
B
C
OPTIONAL
BATTERY
PACKS
TRANSMITTE
R
A 4045131 (AA non-rechargeable)
B 4045177( D-Cell battery pack)
Alkaline
C 4045130 (AA rechargeable)
MiMH