User Manual

MOUNTING OPTIONS

NOTE: ALWAYS mount the transmitter with the heatsink

fins oriented vertically for proper heat dissipation.

NOTE: Leave room for the antenna and/or connectors

when selecting a mounting surface. The supplied

antenna requires more than 5-inches of space.

Option One

The transmitter and heat sink can be mounted (with cooling

fins vertical) against a heat-conductive metal surface. The

transmitter ships with four additional 6-32 pan head Phillips

mounting screws.

• Remove the four 6-32 Phillips screws from the front of the

transmitter.

• Install the four long 6-32 Phillips screws supplied. The

screws become captive.

• Pass the screws through the mounting surface and install

nuts to secure the assembly.

Option Two

An optional wall-mount bracket is available from DTC

Communications, which will allow simple mounting on a

variety of surfaces and enclosures.

• Loosen the four 6-32 Phillips screws from the front of the

transmitter.

• Install the bracket in the orientation shown. Retighten the

four Phillips screws. Hang bracket on wall using #10

screws.

Option 1 Mounting Scheme

Option 2 Mounting Scheme

1.125

2.420

1.475