User Manual

QUICK START

1 Make sure that the external power source to the

transmitter is OFF.

2 Using a screwdriver, turn the channel selector to the

correct channel number.

3 Connect an antenna to the ANTENNA connector on the

module.

4 Select Hi or Lo Power using the recessed switch.

5 Connect the microphone or microphones to the MIC-1

and MIC-2 connectors on the module.

6 Connect a video source and external power (11 -16 VDC)

to the Video/Multi-I/O connector.

7 If you are using an (optional) Encryption model, choose

Encrypted (SCR) or Clear (CLR) as desired

8 Apply power to the transmitter.

Warning: Do not apply power to the transmitter until an

antenna has been connected in step 3.