User Manual

21
SPECIFICATIONS
RF Specifications
General Specifications
Item Specification
Power Input Voltage External 11-16 Vdc
Power Consumption 18 Watts
Reverse Polarity
Protection YES
Chassis Dimensions 3.9 x 2.7 x 0.512”
Encryption Model 3.9 x 2.7 x 0.842”
HeatSink 2.88 x 1.825 x 4.375”
Available Camera Dependent upon voltage
Power supplied to the transmitter.
Current limited to 200 mA.
Controls 10 channel select rotary switch
Panel mounted, recessed slide
power selection switch
Connectors 2 pin Lemo: Mic 1
2 pin Lemo: Mic 2
SMA: Antenna
6 pin Multi I/O: Video in, Data in,
DC input 11-16 Vdc, camera
power, Remote ON/OFF,
Multiplexed Data out, Ground
Programmability 10 channels per
selected band
250 KHz resolution steps
Audio: User programmable from
6.0-7.5 MHz, in 10 kHz steps
Chassis notes Machined, solid aluminum with
rounded edges.
Environmental -30EC to +80EC Temperature
Factors 90% Humidity (non-condensing)
Item Specification
Operating Frequency 2450-2500 MHz, 250 KHz
resolution steps
Power output 5.0 W max. @ nominal
supply voltage, 25 Deg. C.
-3db @ 7VDC ext. -2 dB
over temp.
Output Impedance 50 Ohms
Spurs and Harmonics
output -50 dBc
Load Pull Stability 8:1 VSWR
Frequency Stability +/- 0.003%, -30 to +50°C
Modulation Sensitivity 8 MHz/V nom.
Modulation Sensitivity
Variation +/- 5% across the band
Peak Carrier Deviation 4 MHz nom.
Number of channels 10 max. (user programmable)
Sub-carrier sideband level -28 dBc, +/- 2 dB