User Manual

PROGRAMMING

1 Make sure that the power to the video transmitter is off.

2 Make sure the transmitter has an antenna installed into

the antenna connector prior to programming.

3 Install the programming cable into the Multi I/O connec-

tor on the transmitter.

4 Plug the serial cable of the programming cable into the

COM1 or COM2 port of your computer.

5 Connect the programming cable into a power source.

6 Select Start, programs, DTC communications on your

computer.

7 The system allows you to select device COM1 or COM2,

depending on which serial port you are connected to.

8 Follow the instructions on the DTC Universal Program-

ming screens to begin the download process.

AC POWER

COM1 or COM2

Serial port of computer