User Manual

SINGLE POWER SOURCE

It is configured to supply:

• The video signal to the transmitter

from the camera.

• Power to the transmitter through a

molex connector that can be easily

connected to DTC’s recommended battery pack.

• Power to the camera through a

molex connector that can easily be

connected to DTC’s optional

cameras.

• 4045177 (Optional D-Cell battery pack) Alkaline

NOTE: You will need separate external camera power

compatible with the camera you use unless:

• Voltage requirements are compatible with the 11-16

VDC requirements of the transmitter

• Camera current requirements do not exceed 200 mA

Your main external power supply provides adequate

battery life

The VMS-5000 configuration, which uses the loop through

power source for the camera, consists of the video trans-

mitter, dipole antenna, and DTC cable part number 405189-

024 . This cable is connected to the multi I/O port of the

transmitter.

Cable 405189-024

Camera

Internal Loop

Camera Power

Loop Through Power

Source For Transmitter

& Camera 11-16 VDC

Stripped & Tinned

Leads Standard

AC Power Supply

Transmitter

Antenna