User Manual

9
11
HEATSINK INFORMATION
Baseplate operating temperature is
-20° to + 80°C. Most applications will
not require a heatsink. In applications
where the baseplate temperature will
exceed +80°, add “-HO” to any
VMXX-2000 transmitter part number
for the optional heat sink at no
additional charge. The drawing on
the left clearly marks the mounting
holes for the heatsink installation
when required. To install the
heatsink.
1 Align the mounting holes of the transmitter to the
mounting holes on the heatsink.
2 Secure the heatsink with four (4) 6-32 x 1”
screws.