User Manual

4
QUICK START
1 Make sure that the power to the transmitter is OFF.
2 Using a screwdriver, turn the channel selector to the correct channel number.
3 Connect an antenna to the ANTENNA connector on the module.
4 Select Hi or Lo Power using the recessed switch.
5 Connect the microphone or microphones to the MIC-1 and MIC-2 connectors
on the module.
6 Connect a video source and external power (11 -16 VDC) to the
Video/Multi-I/O connector.
7 Apply power to the transmitter
Warning: Do not apply power to the transmitter until an antenna has been
connected in step 3.
Warning: Refer to Appendix A of this manual for information on the proper
use of antennas.
2
NOTE: DTC has provided you with a “Y” cable (power and video) terminated
with an RCA connector and a BNC adapter for your convenience.
NOTE: The dipole antenna included is not recommended for normal use! This
antenna enables you to quickly set up your transmitter and ensure proper
operation. DTC highly recommends the use of circularly polarized antennas
for the best rejection of multi-path.
3
5
4
6