User Manual

SINGLE POWER SOURCE

It is configured to supply:

• The video signal to the transmitter

from the camera.

• Power to the transmitter through a

molex connector that can be easily

connected to DTC’s battery packs.

• Power to the camera through a

molex connector that can easily be

connected to DTC’s optional

cameras.

NOTE: You will need external camera power if voltage to

the transmitter is not compatible with camera’s operat-

ing voltage, and/or you need greater battery life, and/or

your camera draws more than 200 mA.

CAMERA

ANTENNA

LOOP THROUGH

POWER

SOURCE

FOR TX AND CAMERA

11-16 VDC

STRIPPED AND

TINNED LEADS

STANDARD

TRANSMITTER

INTERNAL LOOP

CAMERA POWER

OPTIONAL

BATTERY

PACKS

The VMS-2000 configuration, which uses the loop through

power source for the camera, consists of the video transmitter,

dipole antenna, and DTC cable part number 405189-024 .

This cable is connected to the multi I/O port of the transmitter.