User Manual

12
BASIC VIDEO TRANSMITTER
It is configured to supply:
• The video signal to the transmitter
from the camera.
• Power to the transmitter through a
molex connector that can easily be
connected to DTC’s battery packs. It
also comes standard with stripped
and tinned leads for a customer
suppled power source. A few of the
DTC battery packs are listed below
and shown in the illustration:
A 4045130 (AA Rechargeable)
B 4045177 ( D-Cell battery pack)
Alkaline
The cable does not supply power to the camera. The camera
is powered separately with a customer supplied power
source. DTC offers other cables that will supply power to the
camera as an option.
TRANSMITTER
CAMERA
ANTENNA
POWER SOURCE
for transmitter only,
9-16 V.
CAMER
A
POWER
+
STRIPPED AND
TINNED LEADS
STANDARD
A
B
OPTIONAL
BATTERY
PACKS
The basic VMS-2000 configuration consists of the video
transmitter, dipole antenna, and DTC cable part number
4045171-024. This cable is connected to the multi I/O port of
the transmitter.