User's Manual
Typical VMD
Configuration
Antenna
Camera
Battery Pack
Power Option
PROGRAMMING
System PC Controller Application Software
Advanced control of the system is available by using the PC control application software.
Typically users may want to customize the default configurations to control settings such as
frequency, scrambling keys, modulation parameters, and video resolution.
The transmitter is controlled by the application 'LJLWDO9LGHR3URJUDPPHUH[H
located on the CD delivered with the product.
A PC is required with an available RS232 Serial COM port to control the transmitter.
Installation of the control program is as simple as copying the file from the CD to a suitable
location on the PC. No install shield routine is launched. Note that the application generates
its own log and initialization files, so it is best to create a dedicated directory for these
applications, perhaps with links to the applications from the desktop of the PC.
Getting Started
• Use the supplied programming cable to
connect the chosen COM port of your
PC to the transmitter to be configured.
• Launch the application by double
clicking or using the 5XQ
command.
NOTE: Please refer to the Digital
Video Programmer Application User
Guide for information on connecting
the VMD to the host computer
and the general programming
environment.
NOTE: The application software
overrides the Configuration Select
Switch. If the controlling PC is
disconnected, the unit will stay at
the configuration last commanded
until the switch position is changed,
at which time the switch resumes
control.
352*5$00,1*&$%/(WR
3&6(5,$/563257
$$
%$77(5<
3$&.