User's Manual

DTC COMMUNICATIONS, INC.
8
COMPONENTS
Channel Select
TRANSMITTER - This rotary switch selects the channel for the repeater’s
transmitter section. The frequencies are programmed in software.
RECEIVER - This rotary switch selects the channel for the repeater’s
receiver section. The frequencies are programmed in software.
Original factory settings are provided on a label with your equipment
Master Power/ Voltage Meter
MASTER POWER SWITCH - This rocker switch turns ON/OFF the
repeater’s power.
POWER LED - This indicator turns ON when the power is ON. The LED
changes to indicate the following:
VOLTAGE METER - This device measures the voltage present at the
internal battery. 12 Volts is nominal. Low voltage (< 11 VDC) indicates the
battery should be recharged.
Optional Scrambling
SCRAMBLE ON/OFF SWITCH - If your TAC COM 2005 is equipped with
the optional Scrambler feature, a Scramble ON/OFF switch is located on
the main panel. Generally, it is recommended that you test the system
first with the Scramble feature turned OFF. Once the system has tested
successfully, turn the Scramble switch ON. The listening post receiver
must also be equipped with a descrambler.
Green Standby/Receive
Red Transmitter ON
Flickering Weak Signal Receiver
12.6