User's Manual

DTC COMMUNICATIONS, INC.
4
QUICK START
Complete the following steps to
start using your TAC COM 2005:
11
11
1 Set Receiver Channel to match
your body wire transmitter
frequency.
22
22
2 Set Transmitter Channel to
match your listening post
receiver’s frequency.
33
33
3 Connect antenna to BNC
connector on rear panel.
44
44
4 Locate antenna in high, open
position (never in the trunk
of a car).
55
55
5 Use the internal rechargeable
battery, or apply 11 to 16 VDC
power to the TAC COM 2005
using the automotive power cable
provided (or optional DC supply).
66
66
6 Verify system by turning ON your
body wire transmitter,
TAC COM 2005, and receiver.
Listen for audio on the receiver.
LED: GREEN = STANDBY/RECEIVE
RED = TX ON
11
11
1
22
22
2
55
55
5
NOTE: Always fully charge
the internal battery before a
mission.
Audio Out Antenna Power In
66
66
6
Rear Panel Connectors Antenna
33
33
3