User Manual
7
Button Operation
• To prevent accidental activation, all buttons require at least a 1-second depression.
The Panic-OFF function requires a 3-second press.
• The TRANSMIT, RECORD and PANIC buttons toggle their respective functions ON and
OFF.
• If the unit is OFF, it automatically powers ON when the any of the three buttons are
pressed.
• PANIC (Alarm icon) - This enables/disables a 1kHz pulsed audio tone on the Radio
transmission, and facilitates silent signaling to those monitoring the radio transmission.
• RECORD (Unlock icon) - This activates/deactivates the integrated Audio recorder
• TRANSMIT (Lock icon) - This activates/deactivates the radio transmitter
• The unit is switched OFF by depressing the TRANSMIT and RECORD buttons
simultaneously. You may also turn-OFF each individual function by pressing the
appropriate button.
• Status Indication - The unit has no visible indicators to prevent compromise of the
unit’s covert nature during operations. It contains a small Vibrating Motor that provides
momentary feedback when buttons are depressed to confirm the operating mode
(TRANSMIT ONLY, RECORD ONLY, TRANSMIT & RECORD), or OFF. See page 5.
NOTE: If the unit is transmitting, pressing a button will cause the transmission to
cease during the vibration feedback response period. Transmission is immediately
restored thereafter. Recording is not similarly affected.
OPERATION
Panic ON/OFF
Button
Record ON/OFF
Button
Transmit ON/
OFF Button