User Manual
13
PROGRAMMING
Launching Cobham Universal Programming Software
1. Remove the Keyfob’s End-Cap.
2. Install one end of the USB programming cable to the USB connector on the Keyfob.
3. Connect the other end of the USB programming cable to an available USB port on your
computer.
4. Launch the Universal Programmer application. The Connect Device dialog box displays. (It
will automatically close when the new device is recognized.)
Windows should automatically detect the new device with removable drive after several
seconds. Windows Explorer should display the new removable drive icon.
USB Cable
Key Fob
bottom view
with end cap
removed