User Manual

DTC COMMUNICATIONS, INC.
16
A downloading message displays momentarily then the Universal
Programmer Main Screen displays (below).
Uploads new channel
information to the TX. Click
this button when all of the
necessary configuration
changes are complete.
Click this button to establish
communication between the
TX and the PC. Follow the
on-screen instructions.
Denotes band of operation.
Global transmit
options.
Individual
channel
information
See below.
Model Number
Firmware
Version
Click on the channel of interest,
then click this button to edit
individual channel settings.
Repeats channel setting from
previously set channel to every
higher number channel.
6. Select the TX Channels tab. The Channels tab displays.
OPEN and SAVE
By selecting FILE > SAVE,
it is possible to save a
particular suite of channel
settings to a file for future
recall. Similarly, FILE > OPEN
can be used to recall a suite
of saved channel settings that
can then be programmed into
the TX.
User Comments are NOT
saved when the channel
setting information is saved
to a file. User Comments are
NOT overwritten if the TX is
programmed from a file that
was recalled.
PROGRAMMING