User Manual

OPERATING TIPS
Additional Operational Notes:
The T-2500-M operates on two or three CR2 batteries in series (6 or 9
VDC). A fresh set of batteries will operate the unit (transmit mode) for
more than 2.5 hours. The four AA battery pack will provide 10 hours of
operation time at low power. An optional four AAA battery pack is also
available from DTC, which will provide five hours of operation time.
NOTE: Always turn the unit OFF and remove used batteries when
not in use. It is imperative to discard partially used batteries, as their
remaining life is not predictable. Always start an operation with a
fresh set of Lithium batteries.
11
DTC COMMUNICATIONS, INC.
Battery Compartment [9 Volt - High
Power (500 mW) Configuration]
(3) CR2 Batteries)
Battery Compartment [6 Volt - Low
Power (250 mW) Configuration]
(2) CR2 Batteries)
Battery Compartment [6 Volt - Low
Power (250 mW) Configuration]
(4) AA Batteries)
(Use Micro Molex to 9V Snap
Cable provided)