Operating Instructions

ManualsBrandsDTC Communications ManualsElectronicsSurveillance Transmitter for Law Enforcement

DOCUMENT NUMBER: OP1920102 REV. 2

DESCRIPTION: T-2050 OPERATING INSTRUCTIONS

ECO NUMBER:_______

Page____of________

Date:_____________

Orig:_____________

SIGN OFF DATE: mm/dd/yy

Proj Eng._________________

Mfg Mgr. _________________

Documentation ____________

Eng. Mgr._________________

Purchasing _______________

Summary of content (6 pages)

PAGE 1
DOCUMENT NUMBER: OP1920102 REV. 2 DESCRIPTION: T-2050 OPERATING INSTRUCTIONS ECO NUMBER:_______ Page____of________ Date:_____________ Orig:_____________ SIGN OFF DATE: mm/dd/yy Proj Eng._________________ Mfg Mgr. _________________ Documentation ____________ Eng. Mgr.
PAGE 2
OP1920102 REV 1 02/26/01 DTC COMMUNICATIONS, INC. Operating Instructions for the T-2050 Pager Disguise Transmitter DTC Communications, Inc.
PAGE 3
OP1920102 REV 1 02/26/01 Introduction The T-2050 is a 200mW audio surveillance transmitter installed in a Motorola FLEX™ pager housing. This narrowband compliant device is synthesized and supports advanced features and has as 4-channel capability. Channel selection is made by the user during power-up, via the reset button. The channel selection is stored in non-volatile memory.
PAGE 4
OP1920102 REV 1 02/26/01 4) Place the battery into the battery compartment, taking note of the positive (+) and negative (-) markings on the battery and the pager housing. 5) Replace the battery door and lock by sliding the door latch toward the battery door. NOTE: As soon as the battery is inserted, the pager will sound the normal Motorola FLEX™ pager power up alert.
PAGE 5
OP1920102 REV 1 02/26/01 One of the Flex™ pager functions is “Turn Pager Off/On”. This is purely a Flex™ pager function and refers only to the Flex™ pager circuitry. The Flex™ pager “Turn Pager Off/On function will have NO EFFECT on operation of the T-2050 transmitter. Operation 1. Place the holder on a belt and load a Lithium AA battery into the pager. The pager will power-up and beep, showing the date, time in the display.
PAGE 6
OP1920102 REV 1 02/26/01 5. If the button is released within 3 seconds, the device will select the new channel. 6. The series of pulses will continually increment and repeat as long as the button is held down (1, 2, 3, 4, 1, 2… etc.) . The highest number of channels is 4. DTC Communications, Inc.