User Manual

DTC COMMUNICATIONS, INC.
17
PROGRAMMING
File
Change Logfile – opens a standard Windows file save dialog box which
allows the user to change the path and name of the log file generated by
the application.
Exit – exits the control application.
Options
Timeouts – password protected access to change timeouts used during the
serial communications between the unit and the controller.
Engineering – password protected access to further diagnostic and
calibration features.
Write License Code – open a further password protected box for entering
license codes for future upgrade.
Change RS232 address – Changes RS232 address of configuration port,
which is normally set to 1.
Write AES Key – opens a dialog box for entering a customer-selected
scrambling key. A key is a combination of 32 hexadecimal characters (64
for optional 256-bit encryption). Hexadecimal characters are 0, 1, 2, 3, 4,
5, 6, 7, 8, 9, A, B, C, D, E, and F. The receiver and transmitter must have
identical AES keys.
Restore Defaults – restores factory default settings in the transmitter.
User should NOT select Restore Defaults.
Polling Enabled – selecting this option makes the control application
automatically refresh the data presented to the user every few seconds.
Polling Options – selecting this option opens a dialog box for entering a
customer-selected polling interval (in milliseconds).