User's Manual

9
MOUNTING
HOLES
POWER / VIDEO IN/
CONFIG
MULT/IO
MIC 1
MIC 2
TELEMETRY
Palladium II
VIDEO TX
COMPONENTS
Transmitter Antenna Connector (SMA) This connector attaches to the
transmitter antenna and carries the RF output signal. Always ensure
the transmitter antenna is attached before operating the Palladium
Transmitter.
Muiti I/O Connector (6-pin Hirose) This connector provides
connections for the DC Power Input, DC Camera Power, Programming,
and 75 Ohm Composite Video Signal.
1 Ground
Video In 75 Ohm 6
RS232 In 5
RS232 Out 4
2 +V Power
10V - 16V
3 Camera Power Out 10V -16V