User's Manual

6
INTRODUCTION
Palladium II
The Palladium II Series of digital video transmitters provide exceptional video quality in high
multipath environments. They are ideal for use inside buildings, in urban areas, and in other
applications where multipath would normally cause video tearing or breakup.
All Palladium II Series transmitters offer three bandwidth modes: DVB-T (6, 7, 8 MHz), Narrow
(2.5 MHz), and Ultra Narrow (1.25 MHz) channel spacing. DVB-T utilizes 2000 carriers to
transmit video and two channels of voice and data. Palladium II transmitters may be located
on adjacent channels without a guard band. AES 128-bit encryption ensures users of secure
communications.
The Palladium 100 is a small transmitter with a 100 mW RF power output. This unit is ideal for
concealments and shorter range robotic and UAV applications. The package is only 4.2” x 2.6”
x 0.65” (approximate dimensions not including connectors). Power consumption is 7.5 Watts.
Operation time on a fresh set of Lithium batteries is approximately three hours. All connections
are conveniently located off the ends of the unit. Many users will want to power this device
with disposable batteries.
Palladium Pd2-TX-100
100-Milliwatt Digital Transmitter
NOTE: Use only Lithium batteries with this device.
TELEMETRY
CHANNEL
Palladium II
VIDEO TX
Typical Palladium II Configuration
Antenna
Audio
Camera
Battery Pack
Power Option
PALLADIUM II