User's Manual

5
4 Set to the required configuration as indicated by the channel numbers. Refer to the
Programming section on page 10 for more information on channel settings. Your Transmitter
is now operational. Confirm its signal with your Palladium Receiver.
4
QUICK START
Palladium Pd2-TX-100 Transmitter,
Front View
Antenna Connector
Accessories
• 10 cell AA Battery Pack
• 12 VDC 2.5A Power Supply & AC Line Cord
• Microphone, Body-Worn, (2)
• Power & Video Cable
• Camera Power Cable (2.1 mm plug)
• DC Power Cable, flying lead
• Camera Power Cable, flying lead
• Programming Cable
• Antenna, ANT2A
• VidiWire on-body antenna system, VW-ANT
• Palladium II Configuration Software
• 16-Pin Data Chaining & Control Connector Cable
• Transport Case
TELEMETRY
CHANNEL
Palladium II
VIDEO TX
Typical Palladium II Configuration
Antenna
Audio
Camera
Battery Pack
Power Option
PALLADIUM II