User's Manual

7
OPERATION
Using your Palladium II Transmitter
Follow the instructions given in the Quick Start section on pages 4-5. When power is first
applied to the Palladium, the unit reverts to the indicated channel and RF ON state. The Alarm
LED may be ON, which indicates that there is no active video input.
Changing your Transmitter Configuration
The Palladium Transmitter can store up to 8 different configurations, which can be selected
with the Channel Control. Each of these configurations can be programmed into the
transmitter with the supplied DTC Programming Software and a Windows PC. Refer to the
Programming section on page 10 for more information.
To cycle through your preconfigured channels rotate the knob to the next setting.