User's Manual

5
QUICK START
4 Set to the required configuration as indicated by the channel numbers. Refer to the
Programming section on page 10 for more information on channel settings. Your
Transmitter is now operational. Confirm its signal with your Palladium Receiver.
Accessories
• 12 VDC 2.5A Power Supply & AC Line Cord
• Microphone, Body-Worn, (2)
• Power & Video Cable
• Camera Power Cable (2.1 mm plug)
• DC Power Cable, flying lead
• Camera Power Cable, flying lead
• Programming Cable
• Antenna, ANT2A
• Palladium II Configuration Software
• 16-Pin Data Chaining & Control Connector Cable
• Transport Case
4
Palladium Pd2-TX-1000 Transmitter,
Front View
Antenna Connector