User's Manual

DTC COMMUNICATIONS, INC.
12
Introduction
When you order a PB-5 Beacon transmitter, DTC will factory program your
frequencies at no additional charge to you. This is often the best path for state and
local agencies with limited frequencies available to them.
DTC will also provide you with free software and a free programming cable,
enabling you to change your frequencies. This is ideal if you often work with other
agencies, or anticipate the equipment being used by a multi-jurisdictional task
force. You can program up to ten channel settings per unit. In general, this allows
you to program most variations you might encounter in the field at the depot level.
TIP: Make sure that you program your transmitter to match the frequencies of
your receiver, and test the components as a system prior to going into the
field!
PROGRAMMING