User Manual Part 3

DTC COMMUNICATIONS, INC.
29
OPERATION
1
2
3
4
5
6
7
8
9
0
#
SPEED
INCREASE
PRESET
SUBMENU
TX PWR
BACKLIGHT
ON/OFF
SET TX
CHANNEL
DISPLAY
ON/OFF
FREEZE
FRAME
NIGHT SHOT
ON/OFF/AUTO
SPEED
DECREASE
HELPEXIT
SUBMENU
Submenu
There are some additional features available in the Submenu. To enter this
menu, you must select
*
(star) on the Main Menu (see left).
The functions available in the Submenu are:
1 TX PWR This function remotely cycles the transmitter from High to
Low to OFF (analog transmitters) or ON to OFF (digital transmitters).
2 Speed Increase (on the Submenu) Increases the motor drive speed on
pan, tilt, and zoom up by one step every time the key is pressed. The
range of speed control is 0 through 7. See Speed command in the Main
Menu and Speed Decrease in the Submenu.
3 Preset Submenu Up to five Preset combinations of Pan, Tilt, and Zoom,
can be stored using the Set function in the Preset Submenu. This will
allow the user to preset a doorway or a driveway, for instance, and then
look there instantly by pressing the Preset Submenu Goto (number).
The Clear function will remove the Preset.
Set: 1
Goto: 2
Clear: 3
(any other key to exit)
W
A
N LOG
AN
D
WARNING: The TX Power OFF command will cause loss of the video
signal; the TX Power Low command (analog only) may also cause
loss of video signal in some situations. The DTMF TX/RX will still
operate, but there will be no text information to visually confirm
button-presses. The MiniBox-4 transmitters take a few seconds to
turn ON. Make sure you practice TX Power commands in a safe
environment before deployment.