User Manual Part 3

DTC COMMUNICATIONS, INC.

DIGITAL - ANALOG TRANSMITTER PROGRAMMING

Setup

If your MiniBox-4 is equipped with the optional digital transmitter use the

Palladium Series Software CD only. If your MiniBox-4 is equipped with the

optional analog transmitter use the Universal Programming Software CD

only. A PC is required with an available RS232 Serial COM port to program

the MiniBox-4 transmitter.

Complete the following steps:

Programming of the system is available by using the software provided.

Typically users may want to control settings such as frequency, scrambling

keys, etc.

The digital transmitter is controlled by the application DTC_tx_ctrl_v1_

3.exe (or higher). Installation of the digital control program is as simple

as copying the ﬁle from the CD to a suitable location on the PC. No install

shield routine is launched. Note that the application generates its own log

and initialization ﬁles, so it is best to create a dedicated directory for these

applications.

The analog transmitter is controlled by the Universal Programmer

application, which is installed from the CD via an install shield wizard.

IMPORTANT: For ANALOG

TX systems use the Universal

Programming Software CD. For

DIGITAL TX systems use the

Palladium Series Software CD.

N LOG