User Manual Part 3

DTC COMMUNICATIONS, INC.
33
OPTIONAL WIRELESS CELLULAR MODEM
To complete your setup, follow the steps given below:
1. After purchasing your activation from the specific cellular carrier
corresponding to your modem, refer to the Raven X Quick Start
provided on the CD (PDF). Follow the instructions provided by the
manufacturer to invoke automatic activation (if available) or complete
the Setup Wizard.
2. The Setup Wizard requires that you install the software CD that was
provided with the Raxen X modem. Be certain to carefully enter the
information required; a single error can cause the system to fail.
3. If possible, download the template file from the www.dtccom.com web
site. This file can be used to populate all of the fields in the Setup
Wizard to speed your installation. Be sure to download the correct
file for your specific carrier. Contact Raven Custom Service at Sierra
Wireless 760-476-8700 or 510-624-4200 or go to www.sierrawireless.
com.
WARNING: Be certain
to carefully enter the
information required; a
single error can cause the
system to fail.
W
A
N LOG
W
D