User Manual Part 3

DTC COMMUNICATIONS, INC.
31
USER-PROVIDED OPTIONS
Consult your IT professional for your specific network. To setup your user-
provided option, complete the following steps:
1. Ensure that your device, when combined with all other AC devices
plugged-in to the four MiniBox-4 outlets, does not exceed 5 Amps total.
2. Secure your device in place in the slot provided. Maximum size is
approximately 3”w x 7.5”d x 7”h (including the power cube and cables).
Typical block diagrams appear below:
W
A
N LOG
W
D
Camera
Camera
Router Modem
Modem
NOTE: The CAT5 cable from
the camera is a crossover
type. To create a straight-
through type, use the straight
adapter provided with
another crossover cable (not
provided).
LAN 1-2-3-4
Internet
CAUTION: Make sure the
Push ON button (master
power) is set to OFF (out)
before applying power or
plugging any device into the
MiniBox-4 outlets.