User Manual Part 2

DTC COMMUNICATIONS, INC.

OPERATION

Analog Video Transmitter

The optional analog DTC Video Transmitter is built into the MiniBox-4

along with two microwave patch antennas. The analog video transmitter

features ten user-programmable channels. A label on the inside door

of the MiniBox-4 lists the factory-set frequencies. Access to the serial

programming connector and channel switch are provided on the MiniBox-

4 Control Panel. Programming should be performed at the factory or by a

trained depot technician using DTC’s Universal Programming software.

Digital Video Transmitter

The optional DTC Palladium II Digital Video Transmitter is built into

the MiniBox-4 along with two microwave patch antennas. The video

transmitter features eight user-programmable channels. A label on the

inside door of the MiniBox-4 lists the factory set frequencies. Access to

the serial programming connector and channel switch are provided on the

MiniBox-4 Control Panel. Programming should be performed at the factory

or by a trained depot technician using DTC’s Palladium Programming

software.

Optional Analog Video Transmitter

Optional Digital Video Transmitter

Sony Camera & PTZ Platform

The MiniBox-4 features a SONY high resolution color camera with 26X

optical and 12X digital zoom. The SONY camera has its own pan/tilt

mechanism and is hidden behind three concealed camera ports in the

utility box. DTMF commands (transmitter models) or browser-based

commands allow for control of pan, tilt, zoom, focus, and auto focus. The

SONY camera works well in low light situations. The camera orientation

can be panned to left, right, or front view ports.

N LOG